Copolymer Polypropylene Macro Synthetic Fiber EMBOSSED For Shotcrete

Macro synthetic Fiber Embossed color can transparent/White/Gray/black
the fiber length can 30mm, 35mm, 40mm,47mm,48mm,50mm,55mm,60mm,65mm

Color:
Quantity:



Inquire Add to Basket

Model:
ELT-EMBOSSED
Brand:
ELITE-INDUS
Code:
5503400000
Material:
Copolymer Polypropylene
Tensile Strength:
Min 550Mpa
Elastic Modulas:
Min 9000Mpa
Equivalent Diameter:
0.8mm+/-0.2mm
Density:
0.91+/-0.01 g/cm3
Fiber Type:
Embossed
Thickness:
0.55mm-0.6mm
Width:
1.3mm-1.4mm
Color:
White, Black, Gray,Natural
Acid & Alkali Resistance:
Excellent

Product Description

Macro Synthetic Fiber ELT-EMBOSSED

Description
ELT-EMBOSSED is a Structural macro synthetic fiber engineered for use as an alternate to steel fibers
and welded wire mesh for precast concrete and shotcrete reinforcement applications.

ELT-EMBOSSED fibers comply with ASTM C1116, Standard Specification for Fiber Reinforced Concrete
and Shotcrete, and are specifically used to improve impact, shatter and abrasion resistance, to increase fatigue
resistance, to increase toughness of concrete and provide long term durability of concrete and cement based
building products. Dosage rates will vary depending upon the reinforcing requirements and can range typically from 2 to 6kg/m³.

ELT-EMBOSSED synthetic macro-fibers comply with applicable portions of the International Code Council (ICC)
Acceptance Criteria AC32 for synthetic fibers and can save time and money on construction projects by eliminating
the purchase, storage, handling, cutting, placing and waste of welded wire mesh. These fibers are chemically inert and will not corrode.

Functions
◆ Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
◆ Cost saving,Is easier to use,to disperse and safe to handle.
◆ Can be used in highly corrosive circumstance.
◆ The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,
and also boosts shrinkage resistance and crack resistance.
◆ The toughness of macro synthetic fibre is less stronger than steel fibre. But test has shown slabs on grade
and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibers per cubic meter,
in comparison,using between 2kg-6kg of macro synthetic fibre per cubic meter of concrete.
Synthetic fibers achieve greater strength and ductility in the matrix

Application
Shotcrete, and engineering industries, concrete project,like:
◆ Slab on Grade and elevated construction (distribution centers, warehouses, etc.)
◆ Thin walled precast (septic tanks, vaults, walls, etc.)
◆ Shotcrete for tunnel linings, pool construction and slope stabilization
◆ Pavements and white-toppings

Specification

*Raw Material*	Virgin grade polymer polypropylene	*Tensile Strength(MPa):*	600-700
*Water Absorbency:*	No	*Density(g/cm3) :*	0.91+/-0.01
*Melting* *Point(C Deg.)*	160 - 170	*Elastic Modulas(Mpa):*	9000 min
*Acid & Alkali Resistance*	Excellent	*Equivalent Diameter*	0.8mm+/-0.2mm
*Thickness*	0.55mm-0.6mm	*Width*	1.3mm-1.4mm
*Moisture Content*	0.0%	*Fiber Type*	Embossed
*Color*	White, Black, Gray,Natural
*Length:*	30mm,47mm,48mm,50mm, 55mm, 60mm,65mm or as per request
*Tandard Dosage*	2kg/m3 to 6kg/m3

Packing
◆ 120-140g/ Water Soluble Film Bundle, 5kgs/Water Soluble Paper Carton

◆ 1200kg/Pallet, 12000kg/20' GP, 1300kg/Pallet26000kg/40' HQ

The fibers are wrapped with water-soluble film and uniquely packaged in water
soluble paper boxes.Just throw the whole boxes of fibers into the concrete mixture,
the boxes and film will dissolve within seconds, leaving the fibers to disperse evenly
throughout the mixture.

Contact Inforamtion:

Email: mika@elite-indus.com
Wechat/WhatsApp: 0086-15212447276