You are here: Home / Products / Concrete admixtures / pp fiber for concrete / Monofilament PP Polypropylene Microfiber Fiber for Concrete Reinforcement


Share to:
sharethis sharing button

Monofilament PP Polypropylene Microfiber Fiber for Concrete Reinforcement

Monofilament pp Polypropylene Fiber for concrete reinforcement as anti-cracking agent Prevent concrete or mortar split and crackle expansion Increase impact resistance and peeling resistance
  • PPMF

  • elite-indus

  • 5503400

Monofilament PP Polypropylene Fiber for concrete reinforcement

ELT- Mono  fiber  Made by  100 %  virgin homopolymer polypropylene multifilament (monofilament)  fibers  was produced by  our patent  advanced technology for fiber spinning, modified by adding functional additive and special surface-treating. Mixing into cement concrete, it has many advantages such as good dispersing,better water affinity, strong linking force.

It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc

ELT- Mono  is a monofilament polypropylene microfiber for concrete reinforcement that complies with ASTM C 1116, Standard Specification for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of plastic shrinkage cracking in concrete.  
Typically used at a dosage rate of
 0.6kg/m3 to 2.8kg/m3.


◆ Resist to shrink & crack 
◆ Increase seepage resistance   
◆ Increase friction resistance   
◆ Increase freezing & thawing resistance 
◆ Improve tendons protection 
◆ Replace steel net (using in plastering)
◆ Prevent mortar split and crackle expansion
◆ Increase impact resistance and peeling resistance


Advantage s
 Cost effective                            
 Replaces anti crack mesh reinforcement
 Decreases construction time and labor        
 Inhibits intrinsic cracking in concrete
 Disperses uniformly throughout the mix       
 Do not rust , Explosive spall control

 Suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.
 Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
 Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
 Suit for any mortar projects and common concrete projects.
 Highway, bridge and other roads.

Applying Instruction
 Dosage : for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Ienough, and for increasing reinforce and seepage resist application 2.8kg/m3 is enough.
 Stirring requirement : 
The proportion of cement, sand and aggregate is no need to be changed.
Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to
 make the compound mix completely. 

Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.
 Normal Type ELT-MONO PPMF-A

Raw Material : Polypropylene Crack Elongation: 20+/-5%
Fiber Type : Monofilament PPMF-A Fiber Diameter: 18+/-5um
Melting Point (C Deg.) : 160 - 170 Density (g/cm3: 0.91+/-0.01
Acid &Alkali Resistance : Strong Tensile Strength (MPa): 450 min.
Length: Times of 4mm or 6mm Water absorbency : NO
Normal Length 4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc...
(times of 4mm or 6mm with 1mm more or less )

 Special Type ELT-MONO
ELT-MONO PPMF-B:High Tensile Strength ---------------------------------------------------- 600MPa Min
ELT-MONO PPMF-C:High Dispersion ---------------------------------------------------------- Special Surface-Treating
Standard Packing: 1kg/PE Film bag, 20kg/Plastic Woven bag, 9600KG/20gp without Pallets
Other packing can as per your request.