 |
| Quantity: | |
|---|---|
C35
elite-indus
350691
Water based acrylic emulsion adhesive C35
For Plastic film to paper lamination
(Wet Lamination Glue / Cold Laminating Glue )
Brief introduction:
It is a water based acrylic emulsion laminating adhesive with mono-component, eco-friendly, solvent-free glue for film to paper by wet/cold laminating process, it is much better than solvent based glue, with the features of good for human healthy, safety while use, easy clean the lamination machine, good binding strength, low cost of lamination etc...
Application:
For laminate/bond plastic film(PET, BOPP, MPET) to paper, paper board, duplex board, cardboard.
Suit for manual, Semi-Auto and Automatic machines.
NOTE: use for room temperature seal/bond without heating.
Type | Features | Technical Parameter |
C35 | 1, Good adhesion 2, Better powder cover property 3, Low cost of lamination 4, use directly without add water | Components: Acrylate copolymer Appearance: Milky white emulsion Solid content: 35%±2 PH value: 5.5-7.5 |
C40 | 1, Execellent lamination property 2, Can add 30%-60% water 3, better powder cover property 4, Low cost of lamination 5, Cannot use directly without add water | Components: Acrylate copolymer Appearance: Milky white emulsion Solid content: 38%±2 PH value: 5.5-7.5 Viscosity: 9000±3000(50±10s)
|
C42 | 1, Execellent lamination property 2, Can add 10%-30% water 3, better powder cover property 4, Low cost of lamination 5, high thickness 6, can use directly without add water
| Components: Acrylate copolymer Appearance: Milky white emulsion Solid content: 41%±2 PH value: 5.5-7.5 Viscosity: 4000±2000(20±10s)
|
Customized grade | Solid content can be adjusted as per your request from 20% to 45% |
Advantages:
1, Can add water to reduce the lamination cost
2, Superior gloss and better ink transfer, paper tear and superior bonding strength.
3, Retain good bond at lower temperature. ü
4, Advantages to Carton/Packaging industry with cold/room temperature laminating process.
5, Eco-friendly, solvent-free.
1, Avoid exposure glue in the sunshine in hot season and keep in cool place, in particular above 0℃ in the winter.
If adhesive was freezed, don't heat it up at once, put it in room temperature above 5℃ to let it unfreeze slowly.
If no layer separation phenomenon after melting, filter with 100 mesh screen.
2, after open the drum/bag, seal the drum/bag if cannot use it out shortly.
3, cannot mix it with other products, to avoid other chemical reaction.
4, if you need add pure/clean water, please must testing first before mass production.
5, laminating process must after the printing ink on paper was dry completely.
6, clean the gluing roller and glue tank before production, to avoid any impurities coming inside.
7, Corona value on BOPP film surface must be above 39dynes.
8, Glue consumption depends on paper, ink and film.
9, after spray powder on printing products, blow the powder before laminating film.
10, while change film roll or paper, cannot wait too long to avoid glue on roller is dry.
11, put the laminated paper in dry place, till it is transparent/dry, then continue further process.
12, please test it, if you change printed paper or film, then start mass production.
Packing:
(1), 50kgs/Plastic drum, 21000kgs/1x20’GP without pallet. Or 13500kgs/1x20`gp with pallet.
(2), 125kgs/drum, 24000kgs/1x40’HQ with pallet.
Water based acrylic emulsion adhesive C35
For Plastic film to paper lamination
(Wet Lamination Glue / Cold Laminating Glue )
Brief introduction:
It is a water based acrylic emulsion laminating adhesive with mono-component, eco-friendly, solvent-free glue for film to paper by wet/cold laminating process, it is much better than solvent based glue, with the features of good for human healthy, safety while use, easy clean the lamination machine, good binding strength, low cost of lamination etc...
Application:
For laminate/bond plastic film(PET, BOPP, MPET) to paper, paper board, duplex board, cardboard.
Suit for manual, Semi-Auto and Automatic machines.
NOTE: use for room temperature seal/bond without heating.
Type | Features | Technical Parameter |
C35 | 1, Good adhesion 2, Better powder cover property 3, Low cost of lamination 4, use directly without add water | Components: Acrylate copolymer Appearance: Milky white emulsion Solid content: 35%±2 PH value: 5.5-7.5 |
C40 | 1, Execellent lamination property 2, Can add 30%-60% water 3, better powder cover property 4, Low cost of lamination 5, Cannot use directly without add water | Components: Acrylate copolymer Appearance: Milky white emulsion Solid content: 38%±2 PH value: 5.5-7.5 Viscosity: 9000±3000(50±10s)
|
C42 | 1, Execellent lamination property 2, Can add 10%-30% water 3, better powder cover property 4, Low cost of lamination 5, high thickness 6, can use directly without add water
| Components: Acrylate copolymer Appearance: Milky white emulsion Solid content: 41%±2 PH value: 5.5-7.5 Viscosity: 4000±2000(20±10s)
|
Customized grade | Solid content can be adjusted as per your request from 20% to 45% |
Advantages:
1, Can add water to reduce the lamination cost
2, Superior gloss and better ink transfer, paper tear and superior bonding strength.
3, Retain good bond at lower temperature. ü
4, Advantages to Carton/Packaging industry with cold/room temperature laminating process.
5, Eco-friendly, solvent-free.
1, Avoid exposure glue in the sunshine in hot season and keep in cool place, in particular above 0℃ in the winter.
If adhesive was freezed, don't heat it up at once, put it in room temperature above 5℃ to let it unfreeze slowly.
If no layer separation phenomenon after melting, filter with 100 mesh screen.
2, after open the drum/bag, seal the drum/bag if cannot use it out shortly.
3, cannot mix it with other products, to avoid other chemical reaction.
4, if you need add pure/clean water, please must testing first before mass production.
5, laminating process must after the printing ink on paper was dry completely.
6, clean the gluing roller and glue tank before production, to avoid any impurities coming inside.
7, Corona value on BOPP film surface must be above 39dynes.
8, Glue consumption depends on paper, ink and film.
9, after spray powder on printing products, blow the powder before laminating film.
10, while change film roll or paper, cannot wait too long to avoid glue on roller is dry.
11, put the laminated paper in dry place, till it is transparent/dry, then continue further process.
12, please test it, if you change printed paper or film, then start mass production.
Packing:
(1), 50kgs/Plastic drum, 21000kgs/1x20’GP without pallet. Or 13500kgs/1x20`gp with pallet.
(2), 125kgs/drum, 24000kgs/1x40’HQ with pallet.
