 |
| Quantity: | |
|---|---|
ELT-SNF
ELITE-INDUS
3824401000
Naphthalene Formaldehyde Sulphonate Water Reducing Agent
Introduction:
Naphthalene formaldehyde sulphonate water reducing agent is a synthetic powder based onbeta-sulphonate formaldehyde ondensate and reactive polymer.
It has the properties of high range water reduction, set retarding and excellent strengthening.
Elt-nsf sodium sulfate is less than 10% , suitable to middle strength or high strength
concrete where high range water reduction is desired.
Specifications:
INDEXITEM | Elt-A | Elt-B | Elt-C |
Appearance | Light brown powder | Light brown powder | Light brown powder |
Solid Content | ≥92 | ≥92 | ≥92 |
Sodium sulphate Content | 5% | 10% | 20% |
Chloride Content | 0.3% | 0.4% | 0.5% |
PH Value | 7-9 | 7-9 | 7-9 |
Net Starch Fluidity | ≥250 mm | ≥240 mm | ≥230 mm |
Surface Tension | 70±1×10-3N/M | 70±1×10-3N/M | 70±1×10-3N/M |
Applications:
A. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.
B.Suitable for preparation of early-strength, high-strength, high-anti-filtration and self-sealing& pumpable concrete.
C.Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc.
D.Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc.
Usage:
A. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
B. Prepare solutions as required.
C. Direct use of powder agent is allowed. Alternatively the addition of the agent is followed by water Moisturization (water-cement ratio:60%).
Contact Information:
Helen Chu
Email:helen@elite-indus.com
WhatsApp/Wechat/Tel:0086-18668055321
Naphthalene Formaldehyde Sulphonate Water Reducing Agent
Introduction:
Naphthalene formaldehyde sulphonate water reducing agent is a synthetic powder based onbeta-sulphonate formaldehyde ondensate and reactive polymer.
It has the properties of high range water reduction, set retarding and excellent strengthening.
Elt-nsf sodium sulfate is less than 10% , suitable to middle strength or high strength
concrete where high range water reduction is desired.
Specifications:
INDEXITEM | Elt-A | Elt-B | Elt-C |
Appearance | Light brown powder | Light brown powder | Light brown powder |
Solid Content | ≥92 | ≥92 | ≥92 |
Sodium sulphate Content | 5% | 10% | 20% |
Chloride Content | 0.3% | 0.4% | 0.5% |
PH Value | 7-9 | 7-9 | 7-9 |
Net Starch Fluidity | ≥250 mm | ≥240 mm | ≥230 mm |
Surface Tension | 70±1×10-3N/M | 70±1×10-3N/M | 70±1×10-3N/M |
Applications:
A. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stage of application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.
B.Suitable for preparation of early-strength, high-strength, high-anti-filtration and self-sealing& pumpable concrete.
C.Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc.
D.Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc.
Usage:
A. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
B. Prepare solutions as required.
C. Direct use of powder agent is allowed. Alternatively the addition of the agent is followed by water Moisturization (water-cement ratio:60%).
Contact Information:
Helen Chu
Email:helen@elite-indus.com
WhatsApp/Wechat/Tel:0086-18668055321
