|
|
|
|
|
|
You are here: Home / Products / Geosynthetics / Geocomposite / Geomembrane Composite Geotextile

loading

Share to:
sharethis sharing button

Geomembrane Composite Geotextile

EltMenbrane-CG serial product is compound geomembrane based on non woven geotextile and PE membrane. There are one layer geotextile and one layer geomembrane;two layers geotextile and one layer geomembrane, two layers geomembrane and one layer geotextile and other multi-layer geotextile and geomembrane.
Availability:
Quantity:
  • EltMembrane-CG

  • Elite-indus

  • EltMembrane-CG

 Geomembrane Composite Geotextile
                                                   ----------EltMembrane-CG
Introduction:
 
EltMenbrane-CG serial product is compound geomembrane based on non woven geotextile and PE membrane. There are one layer geotextile and one layer geomembrane;two layers geotextile and one layer geomembrane, two layers geomembrane and one layer geotextile and other multi-layer geotextile and geomembrane.
 
Properties:
 
1,It integrate permeation,inverse filter and drainage function, and has various functions such as isolation and reinforcement.
2,It has high synthetic strength, large removal strength and high puncture resistance.
3,It has strong drainage capacity, large factor and small expansion factor.
4,It has good aging resistance, wide environmental temperature range and stable quality.
 
Application:
 
Widely used in dam, traffic tunnel, road, airport, drainage, housing, environmental protection and many other fields, main function is preventing leakage, protection, reinforcement etc.
 
Packing:
Woven bag, width 1.0m-6.0m(normal 5.8m), length 50m-100m.
 
 
Specification:
 
1,One layer geotextile and one layer geomembrane:
geotextile from 100g/m2 to 1000g/m2,geomembrane thickness from 0.1m to 1.5mm;
 
2,Two layers geotextile and one layer geomembrane:
 geotextile from 80 g/m2 to 600 g/m2 ,geomembrane thickness from 0.2mm to 1.5mm;
 
3,Two layers geomembrane and one layer geotextile:
geotextile from 100 g/m2 to 1000 g/m2,geomembrane thickness from 0.1mm to 0.8mm;
 
4,Multi-layers:
geotextile from100 g/m2 to 1000 g/m2; geomembrane thickness from 0.1mm to 0.8mm;
 
Product Technological Standard
 
Table 1

Technical index of short fiber needle punched nonwoven compound geomembrane
No.ProjectUnit weight g/m2
4005006007008009001000
1Thickness of Membrane mm0.25-0.350.3-0.5
2Breaking strength kn/m5.07.51012141618
3Elongation at break %30-100
4CBR mullen Burst Strength KN≥1.11.51.92.22.52.83.0
5Tear strength KN≥0.150.250.320.400.480.560.62
6Pell Strength N/cm≥6
7Hydraulic pressureAs table 2
    8Vertical permeability coefficient/(㎝/s(1.0-9.9)×10-11~-13

Table2

ItemThickness of geomembrane(mm)
0.20.30.40.50.60.70.81.0
Hydraulic pressure MPa≥Geotextile+Geomembrane0.40.50.60.81.01.21.41.6
Geotextile+Geomembrene+Geotextile0.50.60.81.01.21.41.61.8

 

Previous: 
Next: 

CONTACT US

Add: 18F Tower C, Winning Ocean Plaza, No. 680 South Maanshan Road, Hefei, China
Tel: 0086-551-6237 2118       
Fax: 0086-551-6237 2117

SALES

Tel: 0086-551-6237 2126, 6237 2128
       E-mail: Jackhu@elite-indus.com
Complain & Suggestions: 
       Tel: 0086-551-6237 2125
       Email: admin@elite-indus.com

Anhui Elite Industrial Co.,ltd

Copyright © 2015,Anhui Elite Industrial Co.,ltd