 |
| Quantity: | |
|---|---|
ELT- EMBOSSED
Elite-indus
5503400000
Copolymer Polypropylene
Min 550Mpa
Min 9000Mpa
0.8mm+/-0.2mm
0.91+/-0.01 g/cm3
160 - 170
0.55mm-0.6mm
1.3mm-1.4mm
White, Black, Gray,Natural
Excellent
Concrete Reinforced Macro Synthetic Fiber 54mm
Structure synthetic polymer macrofiber
Elite Macro Synthetic Fiber of Embossed Form is a patented polypropylene / polyethylene macro synthetic fiber successfully used to replace steel fibers,
welded wire mesh and conventional reinforcing bars in a wide variety of applications.
Our macro synthetic Fiber comply with ISO CE and suitable for Concrete and Shotcrete,
and are specifically used to provide equivalent tensile and bending resistance to conventional reinforcement requirements.
ELT-EMBOSSED is a Structural macro synthetic fiber engineered for use as an alternate to steel fibers and welded wire mesh for precast concrete and shotcrete reinforcement applications.
ELT-EMBOSSED fibers comply with ASTM C1116, Standard Specification for Fiber Reinforced Concrete and Shotcrete, and are specifically used to improve impact, shatter and abrasion resistance, to increase fatigue resistance, to increase toughness of concrete and provide long term durability of concrete and cement based building products.
Dosage rates will vary depending upon the reinforcing requirements and can range typically from 2 to 6kgs a cubic meter.
ELT-EMBOSSED synthetic macro-fibers comply with applicable portions of the International Code Council (ICC) Acceptance Criteria AC32 for synthetic fibers and can save time and money on construction projects by eliminatingthe purchase, storage, handling, cutting, placing and waste of welded wire mesh. These fibers are chemically inert and will not corrode.
Macro Synthetic Fiber Functions
â—† Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
â—† Cost saving,Is easier to use,to disperse and safe to handle.
â—† Can be used in highly corrosive circumstance.
â—† The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,
and also boosts shrinkage resistance and crack resistance.
â—† The toughness of macro synthetic fibre is less stronger than steel fibre.
But test has shown slabs on grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibers per cubic meter,
in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete.
macro Synthetic fibers achieve greater strength and ductility in the matrix.
Macro Synthetic Fiber Typical Application
Shotcrete, and engineering industries, concrete project,like:
â—† Slab on Grade and elevated construction (distribution centers, warehouses, etc.)
â—† Thin walled precast (septic tanks, vaults, walls, etc.)
â—† Shotcrete for tunnel linings, pool construction and slope stabilization
â—† Pavements and white-toppings
Technical Information
| Raw Material | Virgin grade polymer polypropylene | Tensile Strength(MPa): | 550Min |
| Water Absorbency: | No | Density(g/cm3) : | 0.91+/-0.01 |
| Melting Point(C Deg.) | 160 - 170 | Elastic Modulas(Mpa): | 9000 min |
| Acid & Alkali Resistance | Excellent | Equivalent Diameter | 0.8mm+/-0.2mm |
| Thickness | 0.55mm-0.6mm | Width | 1.3mm-1.4mm |
| Moisture Content | 0.0% | Fiber Type | Embossed |
| Color | White, Black, Gray,Natural | ||
| Length: | 30mm,47mm,48mm,50mm, 54mm,55mm, 60mm,65mm or as per request | ||
| Tandard Dosage | 2kg/m3 to 6kg/m3 | ||
Macro Synthetic Fiber Packing
5kg/box, 1200-1300kg/pallet, 12800kg/1x20`gp, 25600kg/1x40`hq.
Contact Inforamtion:
Email: mika@elite-indus.com
Wechat/WhatsApp: 0086-15212447276
Concrete Reinforced Macro Synthetic Fiber 54mm
Structure synthetic polymer macrofiber
Elite Macro Synthetic Fiber of Embossed Form is a patented polypropylene / polyethylene macro synthetic fiber successfully used to replace steel fibers,
welded wire mesh and conventional reinforcing bars in a wide variety of applications.
Our macro synthetic Fiber comply with ISO CE and suitable for Concrete and Shotcrete,
and are specifically used to provide equivalent tensile and bending resistance to conventional reinforcement requirements.
ELT-EMBOSSED is a Structural macro synthetic fiber engineered for use as an alternate to steel fibers and welded wire mesh for precast concrete and shotcrete reinforcement applications.
ELT-EMBOSSED fibers comply with ASTM C1116, Standard Specification for Fiber Reinforced Concrete and Shotcrete, and are specifically used to improve impact, shatter and abrasion resistance, to increase fatigue resistance, to increase toughness of concrete and provide long term durability of concrete and cement based building products.
Dosage rates will vary depending upon the reinforcing requirements and can range typically from 2 to 6kgs a cubic meter.
ELT-EMBOSSED synthetic macro-fibers comply with applicable portions of the International Code Council (ICC) Acceptance Criteria AC32 for synthetic fibers and can save time and money on construction projects by eliminatingthe purchase, storage, handling, cutting, placing and waste of welded wire mesh. These fibers are chemically inert and will not corrode.
Macro Synthetic Fiber Functions
â—† Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
â—† Cost saving,Is easier to use,to disperse and safe to handle.
â—† Can be used in highly corrosive circumstance.
â—† The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,
and also boosts shrinkage resistance and crack resistance.
â—† The toughness of macro synthetic fibre is less stronger than steel fibre.
But test has shown slabs on grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibers per cubic meter,
in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete.
macro Synthetic fibers achieve greater strength and ductility in the matrix.
Macro Synthetic Fiber Typical Application
Shotcrete, and engineering industries, concrete project,like:
â—† Slab on Grade and elevated construction (distribution centers, warehouses, etc.)
â—† Thin walled precast (septic tanks, vaults, walls, etc.)
â—† Shotcrete for tunnel linings, pool construction and slope stabilization
â—† Pavements and white-toppings
Technical Information
| Raw Material | Virgin grade polymer polypropylene | Tensile Strength(MPa): | 550Min |
| Water Absorbency: | No | Density(g/cm3) : | 0.91+/-0.01 |
| Melting Point(C Deg.) | 160 - 170 | Elastic Modulas(Mpa): | 9000 min |
| Acid & Alkali Resistance | Excellent | Equivalent Diameter | 0.8mm+/-0.2mm |
| Thickness | 0.55mm-0.6mm | Width | 1.3mm-1.4mm |
| Moisture Content | 0.0% | Fiber Type | Embossed |
| Color | White, Black, Gray,Natural | ||
| Length: | 30mm,47mm,48mm,50mm, 54mm,55mm, 60mm,65mm or as per request | ||
| Tandard Dosage | 2kg/m3 to 6kg/m3 | ||
Macro Synthetic Fiber Packing
5kg/box, 1200-1300kg/pallet, 12800kg/1x20`gp, 25600kg/1x40`hq.
Contact Inforamtion:
Email: mika@elite-indus.com
Wechat/WhatsApp: 0086-15212447276
