Description
ELT-Mono fiber Made by 100% virgin homopolymer polypropylene multifilament (monofilament) fibers was produced by our patent advanced technology for fiber spinning, modified by adding functional additive and special surface-treating. Mixing into cement concrete, it has many advantages such as good dispersing,better water affinity, strong linking force. It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc…..
ELT-Mono is a monofilament polypropylene microfiber for concrete reinforcement that complies with ASTM C 1116, Standard Specification for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of plastic shrinkage cracking in concrete. Typically used at a dosage rate of 0.6kg/m3 to 1.8kg/m3.
Functions
â—†Resist to shrink & crack
â—†Increase seepage resistance
â—†Increase friction resistance
â—†Increase freezing & thawing resistance
â—†Improve tendons protection
â—†Replace steel net (using in plastering)
â—†Prevent mortar split and crackle expansion
â—†Increase impact resistance and peeling resistance
Advantages
â—† Cost effective
â—† Replaces anti crack mesh reinforcement
â—† Decreases construction time and labor
â—† Inhibits intrinsic cracking in concrete
â—† Disperses uniformly throughout the mix
â—† Do not rust,Explosive spall control
Application â—† Suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction. â—† Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot. â—† Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch. â—† Suit for any mortar projects and common concrete projects. â—† Highway, bridge and other roads. Applying Instruction â—† Dosage : for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough, and for increasing reinforce and seepage resist application 1.8kg/m3 is enough. â—† Stirring requirement :
The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely. Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction. Specification â—† Normal Type ELT-MONO PPMF-A | Raw Material : | Polypropylene | Crack Elongation: | 20+/-5% |
| Fiber Type : | Monofilament PPMF-A | Fiber Diameter: | 18+/-2um |
| Melting Point(C Deg.) : | 160 - 170 | Density(g/cm3) : | 0.91+/-0.01 |
| Acid &Alkali Resistance : | Strong | Tensile Strength(MPa): | 450 min. |
| Length: | Times of 4mm or 6mm | Water absorbency : | NO |
| Normal Length | 4mm, 6mm, 8mm, 12mm,18mm, 24mm, 30mm etc...
(times of 4mm or 6mm with 1mm more or less ) |
â—† Special Type ELT-MONO ELT-MONO PPMF-B：High Tensile Strength -----------------------------------------------------------------600MPa Min ELT-MONO PPMF-C：High Dispersion ----------------------------------------------------------Special Surface-Treating Packing Standard Packing: 1kg/PE Film bag,20kg/Plastic Woven bag,9500KG/20’gp without Pallets Other packing can as per your request.
Contact information：
Email: mika@elite-indus.com
Wechat/WhatsApp: 0086-15212447276 
