 |
| Quantity: | |
|---|---|
Elt-MCS
elite-indus
73269090
---------Elt-MCS
1,Brief Introduction
Elt-MCS milling type steel fiber is made of high strength steel wire milling process, and the high performance fiber product with the anchoring end and a rough surface is formed at both ends.
With high tensile strength, toughness and good dispersion, and concrete with good adhesion.
The content is: 30 -80Kg.
The product is the main export products.this fiber is the main export products. Milling steel fiber is a kind of new and high performance steel fiber variety.
Its length to diameter ratio is 34.3, the ultimate tensile strength is 808.6mpa, and the bond strength of cement mortar is 3.52mpa.Milling steel fiber rough and clean surface, and concrete in the cement paste solid combination, this is the basic reason for milling steel fiber to improve the concrete various energy.
It is can coated with copper ,which we called “Copper coated milling steel fiber”
2,technical parameter
| Type | Length(mm) | Diameter(mm) | (Length-Diameter)i/d | Tensile strength (VIPa) | buckling performance |
| 口×口 | 20~60 | 0.3~1.2 | 20~100 | ≥600 | ≥3 |
Note:1,口×口 is length×diameter；
2,1 kg of the number of steel fiber is based on the nominal length, equivalent diameter, the density of steel determined by calculation. Steel density :0.00785g/mm； 3,
Alien height:h(mm)1.5-2.0
3,Application areas:
Highway Bridge, dam, railway sleepers, port and marine engineering, tunnels, and mine engineering, pipeline engineering and other construction.
---------Elt-MCS
1,Brief Introduction
Elt-MCS milling type steel fiber is made of high strength steel wire milling process, and the high performance fiber product with the anchoring end and a rough surface is formed at both ends.
With high tensile strength, toughness and good dispersion, and concrete with good adhesion.
The content is: 30 -80Kg.
The product is the main export products.this fiber is the main export products. Milling steel fiber is a kind of new and high performance steel fiber variety.
Its length to diameter ratio is 34.3, the ultimate tensile strength is 808.6mpa, and the bond strength of cement mortar is 3.52mpa.Milling steel fiber rough and clean surface, and concrete in the cement paste solid combination, this is the basic reason for milling steel fiber to improve the concrete various energy.
It is can coated with copper ,which we called “Copper coated milling steel fiber”
2,technical parameter
| Type | Length(mm) | Diameter(mm) | (Length-Diameter)i/d | Tensile strength (VIPa) | buckling performance |
| 口×口 | 20~60 | 0.3~1.2 | 20~100 | ≥600 | ≥3 |
Note:1,口×口 is length×diameter；
2,1 kg of the number of steel fiber is based on the nominal length, equivalent diameter, the density of steel determined by calculation. Steel density :0.00785g/mm； 3,
Alien height:h(mm)1.5-2.0
3,Application areas:
Highway Bridge, dam, railway sleepers, port and marine engineering, tunnels, and mine engineering, pipeline engineering and other construction.
