3D Hook End Glued Loose Steel Fiber For Concrete

ELT-HE STEEL FIBER is a low carbon, cold-drawn and hooked-end steel wire fiber designed to provide concrete with temperature and shrinkage crack control, enhanced flexural reinforcement, improved shear strength and increase the crack resistance of concrete. The fiber can loosed or glued.

Size:	ELT 80/60 ELT-65/35
Availability:

Quantity:



Inquire Add to Basket

Model:
ELT-HE
Brand:
ELITE-INDUS
Code:
7326901100

3D Hook End Steel Fiber ELT-HE

Description

ELT-HE STEEL FIBER is a low carbon, cold-drawn and hooked-end steel wire fiber designed to provide concrete with temperature and shrinkage crack control,

enhanced flexural reinforcement, improved shear strength and increase the crack resistance of concrete. The fiber can loosed or glued.

ELT-HE STEEL FIBER complies with ASTM C1116, Standard Specification for Fiber Reinforced Concrete and Shotcrete and ASTM A820, Type I fiber,

Standard Specification for Steel Fibers for Fiber Reinforced Concrete.

ELT-HE These steel macro-fibers will also improve impact, shatter, fatigue and abrasion resistance while increasing toughness of concrete. Dosage rates will

vary depending upon the reinforcing requirements and can range from 15 to 60 kg/m³.

Functions

· Increases impact, shatter and abrasion resistance of concrete

· Reduces segregation, plastic settlement, and shrinkage cracking of concrete

· Provides three-dimensional reinforcement against macro-cracking

· Increases overall durability, fatigue resistance and flexural toughness

· Reduction of in-place cost versus wire mesh for temperature / shrinkage crack control

· Easily added to concrete mixture at any time prior to placement

Application

· Commercial and industrial slabs on ground

· Bridge decks, overlays and pavements

· Precast concrete applications and slabs on pile

· Shotcrete, tunnel linings and slope stabilization

· Mass concrete and composite deck construction

Specification

*Model*	*Length MM*	*Diameter MM*	*Aspect* *Ratio(L/D)*	*Tensile Strength MPA*
*ELT 70/55*	55	0.8	70	≥1100
*ELT 80/60*	60	0.75	80	≥1100
*ELT 50/38*	38	0.75	50	≥1100
*ELT 45/35*	35	0.75	45	≥1100
*ELT 45/30*	30	0.65	45	≥1100
*ELT 100/60*	60	0.62	100	≥1100
*ELT 80/50*	50	0.62	80	≥1100
*ELT 55/35*	35	0.62	55	≥1100
*ELT 50/30*	30	0.62	50	≥1100
*ELT 65/35*	35	0.55	65	≥1100
*ELT 65/60*	60	0.90	65	≥1100
*Note*	Other Specification( Diameter/Length/Tensile Strength) can produce as per your request